Asymmetric Total Syntheses,Stereostructures, and Cytotoxicities of Marine Bromotriterpenoids Aplysiol B (Laurenmariannol) and Saiyacenol A

There are marine cytotoxic bromotriterpenoids, named the thyrsiferol family that are structurally characterized by some tetrahydropyran (THP) and tetrahydrofuran (THF) rings. The thyrsiferol family belongs to natural products that are often difficult to determine their stereostructures even by the current, highly advanced spectroscopic methods, especially in acyclic systems including stereogenic tetrasubstituted carbon centers. In such cases, it is effective to predict and synthesize the possible stereostructures. Herein, to elucidate ambiguous stereostructures and unassigned absolute configurations of aplysiol B, laurenmariannol, and saiyacenol A, members of the thyrsiferol family, we carried out their asymmetric chemical syntheses featuring 6-exo and 5-exo oxacyclizations of epoxy alcohol precursors and 6-endo bromoetherification of a bishomoallylic alcohol. In this paper, we report total assignments of their stereostructures through their asymmetric chemical syntheses and also their preliminary cytotoxic activities against some tumor cells. These results could not have been achieved without depending on asymmetric total synthesis.     

Hjelmslev quadrilateral central configurations

A Hjelmslev quadrilateral is a quadrilateral with two right angles at opposite vertices. Using mutual distances as coordinates, we show that any four-body central configuration forming a Hjelmslev quadrilateral must be a right kite configuration.     

Aeroelastic analysis of cantilever plates using Peters’ aerodynamic model,and the influence of choosing beam or plate theories as the structural model

In this paper, the aeroelastic analyses of a rectangular cantilever plate of varying aspect ratio is presented. The classical plate theory has been selected as the structural model. The main point that distinguishes this study from previously reported research is employing Peters’ theory to model aerodynamic effect which is not straightforward. The Peters’ aerodynamic model was originally developed to provide lift and moment, which is only applicable to the structural model based on the beam theories. In this study, using the basic concept of the Peters’ aerodynamic model in addition to utilizing the Fourier series, the pressure distribution is derived, which makes Peters’ model applicable to structural models based on plate theory. This combination provides a much simpler state–space aeroelastic model for plates in comparison to the prevalent panel methods, which could lead to a significant reduction in computational time. In addition, the aeroelastic response of the plate with respect to changes in the structural model from the beam theory to the plate theory is evaluated. By using data from an experiment carried out at Duke University, the theoretical results are evaluated. Furthermore, the differences in structural models obtained from the plate and beam theories can be divided into two distinct parts, which are responsible for differences in bending and torsional behaviors of the structure, separately. This approach enables us to measure the effects of differences of each behavior separately, which could provide with a new insight into the problem. It has been determined that the flutter speeds obtained from the beam and plate aeroelastic models are little affected by the difference in bending behavior, but rather is mainly caused by the difference in torsional frequencies.     

A general modal frequency-domain vortex lattice method for aeroelastic analyses

The generalized aerodynamic force (GAF) matrix is derived for the Unsteady Vortex Lattice Method (UVLM) without the assumption of out-of-plane dynamics. As a result, the approach naturally includes in-plane motion and forces unlike the doublet lattice method (DLM). The derived UVLM GAF is therefore applicable to industry-standard techniques for aeroelastic stability analyses, such as the p–k method. In this work, the fluid–structure interpolation is performed with radial basis functions for surface interpolation. The generalized aerodynamic forces computed with the UVLM are verified against the DLM from NASTRAN on a simple flat plate configuration. The ability of the UVLM to include steady loads is verified with a T-tail flutter case and the results confirm the importance of including steady loads for T-tail flutter analysis. The modal frequency domain VLM therefore provides the same level of efficiency and accuracy than the DLM, but without the restrictions and with the ability to handle complex geometries. It is therefore a viable replacement to the DLM.     

风力机叶片气动噪声的影响参数*

随着风力机的大型化，风电机组对环境的影响不容忽视，必须对风力机气动噪声进行预测和控制。选取基于NACA、DU翼型的某风力机叶片作为研究基准，采用修正BPM半经验模型计算叶片的气动噪声特性，通过改变翼型族、弦长、机组运行状态、风切变指数、来流风向参数，研究叶片外形几何参数、机组运行工况对叶片气动噪声源的影响。计算结果从多个角度总结出水平轴风力机叶片气动噪声的变化规律，为开发高效低噪风电叶片提供参考。     

悬链线竖向集中力作用下的构形分析和张力计算

目前,悬链线在竖向集中力和均布荷载共同作用下的构形分析和受力计算的理论仍不完善。针对这一问题,通过引入悬链线的几何约束方程、力平衡方程和超越方程,建立了竖向集中力与均布荷载共同作用下的非线性方程组。采用牛顿迭代法求解方程组,得到了悬链线的构形和受力情况。为了验证理论计算的正确性,进行了算例和试验验证。结果表明,算例的计算结果与文献结论保持一致,试验测得的构形和水平张力大小与理论计算的构形和水平张力大小吻合较好。本文的理论计算可以更加简单精确地计算出悬链线在竖向集中力和均布荷载共同作用下的构形和受力情况,为实际工程提供重要的理论指导。     

Large‐Scale Synthesis of Enantiopure Molecular Cages: Chiroptical and Recognition Properties

A convenient and efficient gram‐scale synthesis for enantiopure hemicryptophane–tren (tren=tris(2‐aminoethyl)amine) derivatives has been developed. The four‐step synthesis is based on the optical resolution of a key intermediate, cyclotriveratrylene, for which the energy barrier for racemization has been measured to ensure that no racemization occurs during the two last steps of the synthetic pathway. The assignments of the absolute configurations have been performed by electronic circular dichroism and the enantiopurity was determined by NMR spectroscopy in the presence of enantiopure camphor sulfonic acid. To highlight the interest of such compounds, the recognition of norephedrine neurotransmitter was investigated and showed a remarkable enantioselectivity towards the C₃ symmetrical hosts. Finally, this highly modular synthetic pathway was used to provide eight enantiopure hemicryptophanes with different sizes, shapes, and functionalities. These results underline the high potential of this approach, which could lead to many applications in chiral recognition or asymmetric supramolecular catalysis.     

Total Synthesis and Structure Elucidation of JBIR‐39: A Linear Hexapeptide Possessing Piperazic Acid and γ‐Hydroxypiperazic Acid Residues

The total synthesis and stereochemical structural elucidation of JBIR‐39, containing four nonproteinogenic piperazic acid (Piz) residues, is reported. The synthesis includes Sc(OTf)₃‐catalyzed acylation of a Piz(γ‐OTBS) derivative with piperazic acid chloride, providing the desired Piz‐Piz(γ‐OTBS) dipeptide in high yield without epimerization. After assembling two additional Piz moieties and (S)‐isoleucic acid at the N‐terminus, amidation with the (R)‐α‐methylserine ester at the C‐terminus, and deprotection afforded the desired (2R,8S)‐hexapeptide, which is the assumed structure of JBIR‐39. Although the spectral data of the (2R,8S)‐hexapeptide was not identical to JBIR‐39, further synthesis of three stereoisomers confirmed the stereochemical structure of JBIR‐39 to be (2S,6S,8S,11R,16S,21R,26S,27S).     

Bis(N‐Confused Porphyrin) as a Semirigid Receptor with a Chirality Memory: A Two‐Way Host Enantiomerization through Point‐to‐Axial Chirality Transfer

The adduct formation of protonated bis(N‐confused porphyrin) (BNCP, 3,3′‐bis(meso‐tetratolyl‐2‐aza‐21‐carbaporphyrin) with chiral anions, carboxylic acids, and alcohols was studied in solution by means of ¹H NMR and circular dichroism (CD) spectroscopic analysis and DFT methods. The addition of enantiopure guests to the acidified BNCP resulted in optical activity that vanished after neutralization. Pairs of the ¹H NMR‐distinguishable diastereomers were formed when enantiopure guests were applied, although a single form was observed upon the addition of the racemic mixtures in each case. Unidirectional configuration change that led to diastereomeric excess was observed in several instances. Such an excess was memorized by metalation of the adducts with AgBF₄, thus resulting in optically active silver(III) complexes of BNCP with some enantiomeric excess. Absolute configurations of BNCP cations and bis(zinc) and bis(silver(III)) complexes were determined on the basis of time‐dependent (TD)‐DFT calculations of their CD spectra. It was shown that some of the chiral carboxylates induced opposite directions of enantiomerization of di‐ and tetracations or di‐/tetracation and bis(zinc) complexes. The source of the optical activity of the equimolar diastereomeric mixture of adducts is discussed.